Cross compilation

When compiling code, we can distinguish between the build platform, where the executable is built, and the host platform, where the compiled executable runs. 1

Native compilation is the special case where those two platforms are the same. Cross compilation is the general case where those two platforms are not.

Cross compilation is needed when the host platform has limited resources (such as CPU) or when it’s not easily accessible for development.

The nixpkgs package collection has world-class support for cross compilation, after many years of hard work by the Nix community.

What’s a target platform?

There is a third concept for a platform we call a target platform.

The target platform is relevant to cases where you want to build a compiler binary. In such cases, you would build a compiler on the build platform, run it to compile code on the host platform, and run the final executable on the target platform.

Since this is rarely needed, we will assume that the target is identical to the host.

Pinning Nixpkgs

To ensure the reproducibility of this tutorial as explained in the pinning tutorial:


Determining the host platform config

The build platform is determined automatically by Nix during the configure phase.

The host platform is best determined by running this command on the host platform:

$ bash $(nix-build '<nixpkgs>' -A gnu-config)/config.guess

In case this is not possible (for example, when the host platform is not easily accessible for development), the platform config has to be constructed manually via the following template:


This string representation is used in nixpkgs for historic reasons.

Note that <vendor> is often unknown and <abi> is optional. There’s also no unique identifier for a platform, for example unknown and pc are interchangeable (which is why the script is called config.guess).

If you can’t install Nix, find a way to run config.guess (usually comes with the autoconf package) from the OS you’re able to run on the host platform.

Some other common examples of platform configs:

  • aarch64-apple-darwin14

  • aarch64-pc-linux-gnu

  • x86_64-w64-mingw32

  • aarch64-apple-ios


macOS/Darwin is a special case, as not the whole OS is open-source. It’s only possible to cross compile between aarch64-darwin and x86_64-darwin. aarch64-darwin support was recently added, so cross compilation is barely tested.

Choosing the host platform with Nix

nixpkgs comes with a set of predefined host platforms for cross compilation called pkgsCross.

It is possible to explore them in nix repl:

$ nix repl '<nixpkgs>'
Welcome to Nix version 2.3.12. Type :? for help.

Loading '<nixpkgs>'...
Added 14200 variables.

nix-repl> pkgsCross.<TAB>
pkgsCross.aarch64-android             pkgsCross.musl-power
pkgsCross.aarch64-android-prebuilt    pkgsCross.musl32
pkgsCross.aarch64-darwin              pkgsCross.musl64
pkgsCross.aarch64-embedded            pkgsCross.muslpi
pkgsCross.aarch64-multiplatform       pkgsCross.or1k
pkgsCross.aarch64-multiplatform-musl  pkgsCross.pogoplug4
pkgsCross.aarch64be-embedded          pkgsCross.powernv
pkgsCross.amd64-netbsd                pkgsCross.ppc-embedded
pkgsCross.arm-embedded                pkgsCross.ppc64
pkgsCross.armhf-embedded              pkgsCross.ppc64-musl
pkgsCross.armv7a-android-prebuilt     pkgsCross.ppcle-embedded
pkgsCross.armv7l-hf-multiplatform     pkgsCross.raspberryPi
pkgsCross.avr                         pkgsCross.remarkable1
pkgsCross.ben-nanonote                pkgsCross.remarkable2
pkgsCross.fuloongminipc               pkgsCross.riscv32
pkgsCross.ghcjs                       pkgsCross.riscv32-embedded
pkgsCross.gnu32                       pkgsCross.riscv64
pkgsCross.gnu64                       pkgsCross.riscv64-embedded
pkgsCross.i686-embedded               pkgsCross.scaleway-c1
pkgsCross.iphone32                    pkgsCross.sheevaplug
pkgsCross.iphone32-simulator          pkgsCross.vc4
pkgsCross.iphone64                    pkgsCross.wasi32
pkgsCross.iphone64-simulator          pkgsCross.x86_64-embedded
pkgsCross.mingw32                     pkgsCross.x86_64-netbsd
pkgsCross.mingwW64                    pkgsCross.x86_64-netbsd-llvm
pkgsCross.mmix                        pkgsCross.x86_64-unknown-redox

These attribute names for cross compilation packages have been chosen somewhat freely over the course of time. They usually do not match the corresponding platform config string.

You can retrieve the platform string from pkgsCross.<platform>.stdenv.hostPlatform.config:

nix-repl> pkgsCross.aarch64-multiplatform.stdenv.hostPlatform.config

If the host platform you seek hasn’t been defined yet, please contribute it upstream.

Specifying the host platform

The mechanism for setting up cross compilation works as follows:

  1. Take the build platform configuration and apply it to the current package set, called pkgs by convention.

    The build platform is implied in pkgs = import <nixpkgs> {} to be the current system. This produces a build environment pkgs.stdenv with all the dependencies present to compile on the build platform.

  2. Apply the appropriate host platform configuration to all the packages in pkgsCross.

    Taking pkgs.pkgsCross.<host>.hello will produce the package hello compiled on the build platform to run on the <host> platform.

There are multiple equivalent ways to access packages targeted to the host platform.

  1. Explicitly pick the host platform package from within the build platform environment:

      # all packages for the build system
      pkgs = import <nixpkgs> {};


      # all packages for `aarch64-multiplatform`
      pkgs = (import <nixpkgs> {}).pkgsCross.aarch64-multiplatform;
  2. Pass the host platform to crossSystem when importing <nixpkgs>:

      # conigure `nixpkgs` such that all its packages are build for the host platform
      pkgs = import <nixpkgs> { crossSystem = { config = "aarch64-unknown-linux-gnu"; }; };

    Equivalently, you can pass the host platform as an argument to nix-build:

    $ nix-build '<nixpkgs>' -A hello --arg crossSystem '{ config = "aarch64-unknown-linux-gnu"; }'

Cross compiling for the first time

To cross compile a package like hello, pick the platform attribute — aarch64-multiplatform in our case — and run:

$ nix-build '<nixpkgs>' -A pkgsCross.aarch64-multiplatform.hello

Search for a package attribute name to find the one you’re interested in building.

Real-world cross compiling of a Hello World example

To show off the power of cross compilation in Nix, let’s build our own Hello World program by cross compiling it as static executables to armv6l-unknown-linux-gnueabihf and x86_64-w64-mingw32 (Windows) platforms and run the resulting executable with an emulator.

{ pkgs ? import <nixpkgs> {}

  # Create a C program that prints Hello World
  helloWorld = pkgs.writeText "hello.c" ''
    #include <stdio.h>

    int main (void)
      printf ("Hello, world!\n");
      return 0;

  # A function that takes host platform packages
  crossCompileFor = hostPkgs:
    # Run a simple command with the compiler available
    hostPkgs.runCommandCC "hello-world-cross-test" {} ''
      # Wine requires home directory

      # Compile our example using the compiler specific to our host platform
      $CC ${helloWorld} -o hello

      # Run the compiled program using user mode emulation (Qemu/Wine)
      # buildPackages is passed so that emulation is built for the build platform
      ${hostPkgs.stdenv.hostPlatform.emulator hostPkgs.buildPackages} hello > $out

      # print to stdout
      cat $out
in {
  # Statically compile our example using the two platform hosts
  rpi = crossCompileFor pkgs.pkgsCross.raspberryPi;
  windows = crossCompileFor pkgs.pkgsCross.mingwW64;

If we build this example and print both resulting derivations, we should see “Hello, world!” for each:

$ cat $(nix-build cross-compile.nix)
Hello, world!
Hello, world!

Developer environment with a cross compiler

In the tutorial for declarative reproducible environments, we looked at how Nix helps us provide tooling and system libraries for our project.

It’s also possible to provide an environment with a compiler configured for cross-compilation to static binaries using musl.

Given we have a shell.nix:

{ nixpkgs ? fetchTarball ""
, pkgs ? (import nixpkgs {}).pkgsCross.aarch64-multiplatform

# callPackage is needed due to
pkgs.pkgsStatic.callPackage ({ mkShell, zlib, pkg-config, file }: mkShell {
  # these tools run on the build platform, but are configured to target the host platform
  nativeBuildInputs = [ pkg-config file ];
  # libraries needed for the host platform
  buildInputs = [ zlib ];
}) {}

And hello.c:

#include <stdio.h>

int main (void)
  printf ("Hello, world!\n");
  return 0;

We can cross compile it:

$ nix-shell --run '$CC hello.c -o hello' cross-compile-shell.nix

And confirm it’s aarch64:

$ nix-shell --run 'file hello' cross-compile-shell.nix
hello: ELF 64-bit LSB executable, ARM aarch64, version 1 (SYSV), statically linked, with debug_info, not stripped

Next steps


Terminology for cross compilation platforms differs between build systems. We have chosen to follow autoconf terminology.

View original article on