Nix Release Notes

Release 0.12 (November 20, 2008)

  • Nix no longer uses Berkeley DB to store Nix store metadata. The principal advantages of the new storage scheme are: it works properly over decent implementations of NFS (allowing Nix stores to be shared between multiple machines); no recovery is needed when a Nix process crashes; no write access is needed for read-only operations; no more running out of Berkeley DB locks on certain operations.

    You still need to compile Nix with Berkeley DB support if you want Nix to automatically convert your old Nix store to the new schema. If you don’t need this, you can build Nix with the configure option --disable-old-db-compat.

    After the automatic conversion to the new schema, you can delete the old Berkeley DB files:

    $ cd /nix/var/nix/db
    $ rm __db* log.* derivers references referrers reserved validpaths DB_CONFIG

    The new metadata is stored in the directories /nix/var/nix/db/info and /nix/var/nix/db/referrer. Though the metadata is stored in human-readable plain-text files, they are not intended to be human-editable, as Nix is rather strict about the format.

    The new storage schema may or may not require less disk space than the Berkeley DB environment, mostly depending on the cluster size of your file system. With 1 KiB clusters (which seems to be the ext3 default nowadays) it usually takes up much less space.

  • There is a new substituter that copies paths directly from other (remote) Nix stores mounted somewhere in the filesystem. For instance, you can speed up an installation by mounting some remote Nix store that already has the packages in question via NFS or sshfs. The environment variable NIX_OTHER_STORES specifies the locations of the remote Nix directories, e.g. /mnt/remote-fs/nix.

  • New nix-store operations --dump-db and --load-db to dump and reload the Nix database.

  • The garbage collector has a number of new options to allow only some of the garbage to be deleted. The option --max-freed N tells the collector to stop after at least N bytes have been deleted. The option --max-links N tells it to stop after the link count on /nix/store has dropped below N. This is useful for very large Nix stores on filesystems with a 32000 subdirectories limit (like ext3). The option --use-atime causes store paths to be deleted in order of ascending last access time. This allows non-recently used stuff to be deleted. The option --max-atime time specifies an upper limit to the last accessed time of paths that may be deleted. For instance,

        $ nix-store --gc -v --max-atime $(date +%s -d "2 months ago")

    deletes everything that hasn’t been accessed in two months.

  • nix-env now uses optimistic profile locking when performing an operation like installing or upgrading, instead of setting an exclusive lock on the profile. This allows multiple nix-env -i / -u / -e operations on the same profile in parallel. If a nix-env operation sees at the end that the profile was changed in the meantime by another process, it will just restart. This is generally cheap because the build results are still in the Nix store.

  • The option --dry-run is now supported by nix-store -r and nix-build.

  • The information previously shown by --dry-run (i.e., which derivations will be built and which paths will be substituted) is now always shown by nix-env, nix-store -r and nix-build. The total download size of substitutable paths is now also shown. For instance, a build will show something like

    the following derivations will be built:
    the following paths will be downloaded/copied (30.02 MiB):

  • Language features:

    • @-patterns as in Haskell. For instance, in a function definition

      f = args @ {x, y, z}: ...;

      args refers to the argument as a whole, which is further pattern-matched against the attribute set pattern {x, y, z}.

    • ...” (ellipsis) patterns. An attribute set pattern can now say ... at the end of the attribute name list to specify that the function takes at least the listed attributes, while ignoring additional attributes. For instance,

      {stdenv, fetchurl, fuse, ...}: ...

      defines a function that accepts any attribute set that includes at least the three listed attributes.

    • New primops: builtins.parseDrvName (split a package name string like "nix-0.12pre12876" into its name and version components, e.g. "nix" and "0.12pre12876"), builtins.compareVersions (compare two version strings using the same algorithm that nix-env uses), builtins.length (efficiently compute the length of a list), builtins.mul (integer multiplication), builtins.div (integer division).

  • nix-prefetch-url now supports mirror:// URLs, provided that the environment variable NIXPKGS_ALL points at a Nixpkgs tree.

  • Removed the commands nix-pack-closure and nix-unpack-closure. You can do almost the same thing but much more efficiently by doing nix-store --export $(nix-store -qR paths) > closure and nix-store --import < closure.

  • Lots of bug fixes, including a big performance bug in the handling of with-expressions.

Release 0.11 (December 31, 2007)

Nix 0.11 has many improvements over the previous stable release. The most important improvement is secure multi-user support. It also features many usability enhancements and language extensions, many of them prompted by NixOS, the purely functional Linux distribution based on Nix. Here is an (incomplete) list:

  • Secure multi-user support. A single Nix store can now be shared between multiple (possible untrusted) users. This is an important feature for NixOS, where it allows non-root users to install software. The old setuid method for sharing a store between multiple users has been removed. Details for setting up a multi-user store can be found in the manual.

  • The new command nix-copy-closure gives you an easy and efficient way to exchange software between machines. It copies the missing parts of the closure of a set of store path to or from a remote machine via ssh.

  • A new kind of string literal: strings between double single-quotes ('') have indentation “intelligently” removed. This allows large strings (such as shell scripts or configuration file fragments in NixOS) to cleanly follow the indentation of the surrounding expression. It also requires much less escaping, since '' is less common in most languages than ".

  • nix-env --set modifies the current generation of a profile so that it contains exactly the specified derivation, and nothing else. For example, nix-env -p /nix/var/nix/profiles/browser --set firefox lets the profile named browser contain just Firefox.

  • nix-env now maintains meta-information about installed packages in profiles. The meta-information is the contents of the meta attribute of derivations, such as description or homepage. The command nix-env -q --xml --meta shows all meta-information.

  • nix-env now uses the meta.priority attribute of derivations to resolve filename collisions between packages. Lower priority values denote a higher priority. For instance, the GCC wrapper package and the Binutils package in Nixpkgs both have a file bin/ld, so previously if you tried to install both you would get a collision. Now, on the other hand, the GCC wrapper declares a higher priority than Binutils, so the former’s bin/ld is symlinked in the user environment.

  • nix-env -i / -u: instead of breaking package ties by version, break them by priority and version number. That is, if there are multiple packages with the same name, then pick the package with the highest priority, and only use the version if there are multiple packages with the same priority.

    This makes it possible to mark specific versions/variant in Nixpkgs more or less desirable than others. A typical example would be a beta version of some package (e.g., gcc-4.2.0rc1) which should not be installed even though it is the highest version, except when it is explicitly selected (e.g., nix-env -i gcc-4.2.0rc1).

  • nix-env --set-flag allows meta attributes of installed packages to be modified. There are several attributes that can be usefully modified, because they affect the behaviour of nix-env or the user environment build script:

    • meta.priority can be changed to resolve filename clashes (see above).

    • meta.keep can be set to true to prevent the package from being upgraded or replaced. Useful if you want to hang on to an older version of a package.

    • can be set to false to “disable” the package. That is, no symlinks will be generated to the files of the package, but it remains part of the profile (so it won’t be garbage-collected). Set it back to true to re-enable the package.

  • nix-env -q now has a flag --prebuilt-only (-b) that causes nix-env to show only those derivations whose output is already in the Nix store or that can be substituted (i.e., downloaded from somewhere). In other words, it shows the packages that can be installed “quickly”, i.e., don’t need to be built from source. The -b flag is also available in nix-env -i and nix-env -u to filter out derivations for which no pre-built binary is available.

  • The new option --argstr (in nix-env, nix-instantiate and nix-build) is like --arg, except that the value is a string. For example, --argstr system i686-linux is equivalent to --arg system \"i686-linux\" (note that --argstr prevents annoying quoting around shell arguments).

  • nix-store has a new operation --read-log (-l) paths that shows the build log of the given paths.

  • Nix now uses Berkeley DB 4.5. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.4.

  • The option --max-silent-time (corresponding to the configuration setting build-max-silent-time) allows you to set a timeout on builds — if a build produces no output on stdout or stderr for the given number of seconds, it is terminated. This is useful for recovering automatically from builds that are stuck in an infinite loop.

  • nix-channel: each subscribed channel is its own attribute in the top-level expression generated for the channel. This allows disambiguation (e.g. nix-env -i -A nixpkgs_unstable.firefox).

  • The substitutes table has been removed from the database. This makes operations such as nix-pull and nix-channel --update much, much faster.

  • nix-pull now supports bzip2-compressed manifests. This speeds up channels.

  • nix-prefetch-url now has a limited form of caching. This is used by nix-channel to prevent unnecessary downloads when the channel hasn’t changed.

  • nix-prefetch-url now by default computes the SHA-256 hash of the file instead of the MD5 hash. In calls to fetchurl you should pass the sha256 attribute instead of md5. You can pass either a hexadecimal or a base-32 encoding of the hash.

  • Nix can now perform builds in an automatically generated “chroot”. This prevents a builder from accessing stuff outside of the Nix store, and thus helps ensure purity. This is an experimental feature.

  • The new command nix-store --optimise reduces Nix store disk space usage by finding identical files in the store and hard-linking them to each other. It typically reduces the size of the store by something like 25-35%.

  • ~/.nix-defexpr can now be a directory, in which case the Nix expressions in that directory are combined into an attribute set, with the file names used as the names of the attributes. The command nix-env --import (which set the ~/.nix-defexpr symlink) is removed.

  • Derivations can specify the new special attribute allowedReferences to enforce that the references in the output of a derivation are a subset of a declared set of paths. For example, if allowedReferences is an empty list, then the output must not have any references. This is used in NixOS to check that generated files such as initial ramdisks for booting Linux don’t have any dependencies.

  • The new attribute exportReferencesGraph allows builders access to the references graph of their inputs. This is used in NixOS for tasks such as generating ISO-9660 images that contain a Nix store populated with the closure of certain paths.

  • Fixed-output derivations (like fetchurl) can define the attribute impureEnvVars to allow external environment variables to be passed to builders. This is used in Nixpkgs to support proxy configuration, among other things.

  • Several new built-in functions: builtins.attrNames, builtins.filterSource, builtins.isAttrs, builtins.isFunction, builtins.listToAttrs, builtins.stringLength, builtins.sub, builtins.substring, throw, builtins.trace, builtins.readFile.

Release 0.10.1 (October 11, 2006)

This release fixes two somewhat obscure bugs that occur when evaluating Nix expressions that are stored inside the Nix store (NIX-67). These do not affect most users.

Release 0.10 (October 6, 2006)


This version of Nix uses Berkeley DB 4.4 instead of 4.3. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.3. In particular, if you use a Nix installed through Nix, you should run

$ nix-store --clear-substitutes



Also, the database schema has changed slighted to fix a performance issue (see below). When you run any Nix 0.10 command for the first time, the database will be upgraded automatically. This is irreversible.

  • nix-env usability improvements:

    • An option --compare-versions (or -c) has been added to nix-env --query to allow you to compare installed versions of packages to available versions, or vice versa. An easy way to see if you are up to date with what’s in your subscribed channels is nix-env -qc \*.

    • nix-env --query now takes as arguments a list of package names about which to show information, just like --install, etc.: for example, nix-env -q gcc. Note that to show all derivations, you need to specify \*.

    • nix-env -i pkgname will now install the highest available version of pkgname, rather than installing all available versions (which would probably give collisions) (NIX-31).

    • nix-env (-i|-u) --dry-run now shows exactly which missing paths will be built or substituted.

    • nix-env -qa --description shows human-readable descriptions of packages, provided that they have a meta.description attribute (which most packages in Nixpkgs don’t have yet).

  • New language features:

    • Reference scanning (which happens after each build) is much faster and takes a constant amount of memory.

    • String interpolation. Expressions like

      "--with-freetype2-library=" + freetype + "/lib"

      can now be written as


      You can write arbitrary expressions within ${...}, not just identifiers.

    • Multi-line string literals.

    • String concatenations can now involve derivations, as in the example "--with-freetype2-library=" + freetype + "/lib". This was not previously possible because we need to register that a derivation that uses such a string is dependent on freetype. The evaluator now properly propagates this information. Consequently, the subpath operator (~) has been deprecated.

    • Default values of function arguments can now refer to other function arguments; that is, all arguments are in scope in the default values (NIX-45).

    • Lots of new built-in primitives, such as functions for list manipulation and integer arithmetic. See the manual for a complete list. All primops are now available in the set builtins, allowing one to test for the availability of primop in a backwards-compatible way.

    • Real let-expressions: let x = ...; ... z = ...; in ....

  • New commands nix-pack-closure and nix-unpack-closure than can be used to easily transfer a store path with all its dependencies to another machine. Very convenient whenever you have some package on your machine and you want to copy it somewhere else.

  • XML support:

    • nix-env -q --xml prints the installed or available packages in an XML representation for easy processing by other tools.

    • nix-instantiate --eval-only --xml prints an XML representation of the resulting term. (The new flag --strict forces ‘deep’ evaluation of the result, i.e., list elements and attributes are evaluated recursively.)

    • In Nix expressions, the primop builtins.toXML converts a term to an XML representation. This is primarily useful for passing structured information to builders.

  • You can now unambigously specify which derivation to build or install in nix-env, nix-instantiate and nix-build using the --attr / -A flags, which takes an attribute name as argument. (Unlike symbolic package names such as subversion-1.4.0, attribute names in an attribute set are unique.) For instance, a quick way to perform a test build of a package in Nixpkgs is nix-build pkgs/top-level/all-packages.nix -A foo. nix-env -q --attr shows the attribute names corresponding to each derivation.

  • If the top-level Nix expression used by nix-env, nix-instantiate or nix-build evaluates to a function whose arguments all have default values, the function will be called automatically. Also, the new command-line switch --arg name value can be used to specify function arguments on the command line.

  • nix-install-package --url URL allows a package to be installed directly from the given URL.

  • Nix now works behind an HTTP proxy server; just set the standard environment variables http_proxy, https_proxy, ftp_proxy or all_proxy appropriately. Functions such as fetchurl in Nixpkgs also respect these variables.

  • nix-build -o symlink allows the symlink to the build result to be named something other than result.

  • Platform support:

    • Support for 64-bit platforms, provided a suitably patched ATerm library is used. Also, files larger than 2 GiB are now supported.

    • Added support for Cygwin (Windows, i686-cygwin), Mac OS X on Intel (i686-darwin) and Linux on PowerPC (powerpc-linux).

    • Users of SMP and multicore machines will appreciate that the number of builds to be performed in parallel can now be specified in the configuration file in the build-max-jobs setting.

  • Garbage collector improvements:

    • Open files (such as running programs) are now used as roots of the garbage collector. This prevents programs that have been uninstalled from being garbage collected while they are still running. The script that detects these additional runtime roots ( is inherently system-specific, but it should work on Linux and on all platforms that have the lsof utility.

    • nix-store --gc (a.k.a. nix-collect-garbage) prints out the number of bytes freed on standard output. nix-store --gc --print-dead shows how many bytes would be freed by an actual garbage collection.

    • nix-collect-garbage -d removes all old generations of all profiles before calling the actual garbage collector (nix-store --gc). This is an easy way to get rid of all old packages in the Nix store.

    • nix-store now has an operation --delete to delete specific paths from the Nix store. It won’t delete reachable (non-garbage) paths unless --ignore-liveness is specified.

  • Berkeley DB 4.4’s process registry feature is used to recover from crashed Nix processes.

  • A performance issue has been fixed with the referer table, which stores the inverse of the references table (i.e., it tells you what store paths refer to a given path). Maintaining this table could take a quadratic amount of time, as well as a quadratic amount of Berkeley DB log file space (in particular when running the garbage collector) (NIX-23).

  • Nix now catches the TERM and HUP signals in addition to the INT signal. So you can now do a killall nix-store without triggering a database recovery.

  • bsdiff updated to version 4.3.

  • Substantial performance improvements in expression evaluation and nix-env -qa, all thanks to Valgrind. Memory use has been reduced by a factor 8 or so. Big speedup by memoisation of path hashing.

  • Lots of bug fixes, notably:

    • Make sure that the garbage collector can run succesfully when the disk is full (NIX-18).

    • nix-env now locks the profile to prevent races between concurrent nix-env operations on the same profile (NIX-7).

    • Removed misleading messages from nix-env -i (e.g., installing `foo' followed by uninstalling `foo') (NIX-17).

  • Nix source distributions are a lot smaller now since we no longer include a full copy of the Berkeley DB source distribution (but only the bits we need).

  • Header files are now installed so that external programs can use the Nix libraries.

Release 0.9.2 (September 21, 2005)

This bug fix release fixes two problems on Mac OS X:

  • If Nix was linked against statically linked versions of the ATerm or Berkeley DB library, there would be dynamic link errors at runtime.

  • nix-pull and nix-push intermittently failed due to race conditions involving pipes and child processes with error messages such as open2: open(GLOB(0x180b2e4), >&=9) failed: Bad file descriptor at /nix/bin/nix-pull line 77 (issue NIX-14).

Release 0.9.1 (September 20, 2005)

This bug fix release addresses a problem with the ATerm library when the --with-aterm flag in configure was not used.

Release 0.9 (September 16, 2005)

NOTE: this version of Nix uses Berkeley DB 4.3 instead of 4.2. The database is upgraded automatically, but you should be careful not to use old versions of Nix that still use Berkeley DB 4.2. In particular, if you use a Nix installed through Nix, you should run

$ nix-store --clear-substitutes


  • Unpacking of patch sequences is much faster now since we no longer do redundant unpacking and repacking of intermediate paths.

  • Nix now uses Berkeley DB 4.3.

  • The derivation primitive is lazier. Attributes of dependent derivations can mutually refer to each other (as long as there are no data dependencies on the outPath and drvPath attributes computed by derivation).

    For example, the expression derivation attrs now evaluates to (essentially)

    attrs // {
      type = "derivation";
      outPath = derivation! attrs;
      drvPath = derivation! attrs;

    where derivation! is a primop that does the actual derivation instantiation (i.e., it does what derivation used to do). The advantage is that it allows commands such as nix-env -qa and nix-env -i to be much faster since they no longer need to instantiate all derivations, just the name attribute.

    Also, it allows derivations to cyclically reference each other, for example,

    webServer = derivation {
      hostName = "";
      services = [svnService];
    svnService = derivation {
      hostName = webServer.hostName;

    Previously, this would yield a black hole (infinite recursion).

  • nix-build now defaults to using ./default.nix if no Nix expression is specified.

  • nix-instantiate, when applied to a Nix expression that evaluates to a function, will call the function automatically if all its arguments have defaults.

  • Nix now uses libtool to build dynamic libraries. This reduces the size of executables.

  • A new list concatenation operator ++. For example, [1 2 3] ++ [4 5 6] evaluates to [1 2 3 4 5 6].

  • Some currently undocumented primops to support low-level build management using Nix (i.e., using Nix as a Make replacement). See the commit messages for r3578 and r3580.

  • Various bug fixes and performance improvements.

Release 0.8.1 (April 13, 2005)

This is a bug fix release.

  • Patch downloading was broken.

  • The garbage collector would not delete paths that had references from invalid (but substitutable) paths.

Release 0.8 (April 11, 2005)

NOTE: the hashing scheme in Nix 0.8 changed (as detailed below). As a result, nix-pull manifests and channels built for Nix 0.7 and below will now work anymore. However, the Nix expression language has not changed, so you can still build from source. Also, existing user environments continue to work. Nix 0.8 will automatically upgrade the database schema of previous installations when it is first run.

If you get the error message

you have an old-style manifest `/nix/var/nix/manifests/[...]'; please
delete it

you should delete previously downloaded manifests:

$ rm /nix/var/nix/manifests/*

If nix-channel gives the error message

manifest `[channel]/MANIFEST'
is too old (i.e., for Nix <= 0.7)

then you should unsubscribe from the offending channel (nix-channel --remove URL; leave out /MANIFEST), and subscribe to the same URL, with channels replaced by channels-v3 (e.g.,

Nix 0.8 has the following improvements:

  • The cryptographic hashes used in store paths are now 160 bits long, but encoded in base-32 so that they are still only 32 characters long (e.g., /nix/store/csw87wag8bqlqk7ipllbwypb14xainap-atk-1.9.0). (This is actually a 160 bit truncation of a SHA-256 hash.)

  • Big cleanups and simplifications of the basic store semantics. The notion of “closure store expressions” is gone (and so is the notion of “successors”); the file system references of a store path are now just stored in the database.

    For instance, given any store path, you can query its closure:

    $ nix-store -qR $(which firefox)
    ... lots of paths ...

    Also, Nix now remembers for each store path the derivation that built it (the “deriver”):

    $ nix-store -qR $(which firefox)

    So to see the build-time dependencies, you can do

    $ nix-store -qR $(nix-store -qd $(which firefox))

    or, in a nicer format:

    $ nix-store -q --tree $(nix-store -qd $(which firefox))

    File system references are also stored in reverse. For instance, you can query all paths that directly or indirectly use a certain Glibc:

    $ nix-store -q --referrers-closure \

  • The concept of fixed-output derivations has been formalised. Previously, functions such as fetchurl in Nixpkgs used a hack (namely, explicitly specifying a store path hash) to prevent changes to, say, the URL of the file from propagating upwards through the dependency graph, causing rebuilds of everything. This can now be done cleanly by specifying the outputHash and outputHashAlgo attributes. Nix itself checks that the content of the output has the specified hash. (This is important for maintaining certain invariants necessary for future work on secure shared stores.)

  • One-click installation :-) It is now possible to install any top-level component in Nixpkgs directly, through the web — see, e.g., All you have to do is associate /nix/bin/nix-install-package with the MIME type application/nix-package (or the extension .nixpkg), and clicking on a package link will cause it to be installed, with all appropriate dependencies. If you just want to install some specific application, this is easier than subscribing to a channel.

  • nix-store -r PATHS now builds all the derivations PATHS in parallel. Previously it did them sequentially (though exploiting possible parallelism between subderivations). This is nice for build farms.

  • nix-channel has new operations --list and --remove.

  • New ways of installing components into user environments:

    • Copy from another user environment:

      $ nix-env -i --from-profile .../other-profile firefox

    • Install a store derivation directly (bypassing the Nix expression language entirely):

      $ nix-env -i /nix/store/z58v41v21xd3...-aterm-2.3.1.drv

      (This is used to implement nix-install-package, which is therefore immune to evolution in the Nix expression language.)

    • Install an already built store path directly:

      $ nix-env -i /nix/store/hsyj5pbn0d9i...-aterm-2.3.1

    • Install the result of a Nix expression specified as a command-line argument:

      $ nix-env -f .../i686-linux.nix -i -E 'x: x.firefoxWrapper'

      The difference with the normal installation mode is that -E does not use the name attributes of derivations. Therefore, this can be used to disambiguate multiple derivations with the same name.

  • A hash of the contents of a store path is now stored in the database after a succesful build. This allows you to check whether store paths have been tampered with: nix-store --verify --check-contents.

  • Implemented a concurrent garbage collector. It is now always safe to run the garbage collector, even if other Nix operations are happening simultaneously.

    However, there can still be GC races if you use nix-instantiate and nix-store --realise directly to build things. To prevent races, use the --add-root flag of those commands.

  • The garbage collector now finally deletes paths in the right order (i.e., topologically sorted under the “references” relation), thus making it safe to interrupt the collector without risking a store that violates the closure invariant.

  • Likewise, the substitute mechanism now downloads files in the right order, thus preserving the closure invariant at all times.

  • The result of nix-build is now registered as a root of the garbage collector. If the ./result link is deleted, the GC root disappears automatically.

  • The behaviour of the garbage collector can be changed globally by setting options in /nix/etc/nix/nix.conf.

    • gc-keep-derivations specifies whether deriver links should be followed when searching for live paths.

    • gc-keep-outputs specifies whether outputs of derivations should be followed when searching for live paths.

    • env-keep-derivations specifies whether user environments should store the paths of derivations when they are added (thus keeping the derivations alive).

  • New nix-env query flags --drv-path and --out-path.

  • fetchurl allows SHA-1 and SHA-256 in addition to MD5. Just specify the attribute sha1 or sha256 instead of md5.

  • Manual updates.

Release 0.7 (January 12, 2005)

  • Binary patching. When upgrading components using pre-built binaries (through nix-pull / nix-channel), Nix can automatically download and apply binary patches to already installed components instead of full downloads. Patching is “smart”: if there is a sequence of patches to an installed component, Nix will use it. Patches are currently generated automatically between Nixpkgs (pre-)releases.

  • Simplifications to the substitute mechanism.

  • Nix-pull now stores downloaded manifests in /nix/var/nix/manifests.

  • Metadata on files in the Nix store is canonicalised after builds: the last-modified timestamp is set to 0 (00:00:00 1/1/1970), the mode is set to 0444 or 0555 (readable and possibly executable by all; setuid/setgid bits are dropped), and the group is set to the default. This ensures that the result of a build and an installation through a substitute is the same; and that timestamp dependencies are revealed.

Release 0.6 (November 14, 2004)

  • Rewrite of the normalisation engine.

    • Multiple builds can now be performed in parallel (option -j).

    • Distributed builds. Nix can now call a shell script to forward builds to Nix installations on remote machines, which may or may not be of the same platform type.

    • Option --fallback allows recovery from broken substitutes.

    • Option --keep-going causes building of other (unaffected) derivations to continue if one failed.

  • Improvements to the garbage collector (i.e., it should actually work now).

  • Setuid Nix installations allow a Nix store to be shared among multiple users.

  • Substitute registration is much faster now.

  • A utility nix-build to build a Nix expression and create a symlink to the result int the current directory; useful for testing Nix derivations.

  • Manual updates.

  • nix-env changes:

    • Derivations for other platforms are filtered out (which can be overriden using --system-filter).

    • --install by default now uninstall previous derivations with the same name.

    • --upgrade allows upgrading to a specific version.

    • New operation --delete-generations to remove profile generations (necessary for effective garbage collection).

    • Nicer output (sorted, columnised).

  • More sensible verbosity levels all around (builder output is now shown always, unless -Q is given).

  • Nix expression language changes:

    • New language construct: with E1; E2 brings all attributes defined in the attribute set E1 in scope in E2.

    • Added a map function.

    • Various new operators (e.g., string concatenation).

  • Expression evaluation is much faster.

  • An Emacs mode for editing Nix expressions (with syntax highlighting and indentation) has been added.

  • Many bug fixes.

Release 0.5 and earlier

Please refer to the Subversion commit log messages.